Aluminum Honeycomb Panel Specification Introduction

Aluminum honeycomb Composite Aluminum Panel System panel is a kind of composite honeycomb structure, using high-quality aluminum plate as the base material, and hot-pressing composite forming with aluminum alloy honeycomb core material. Aluminum honeycomb panels provide architects with rich choices from panel material, shape, joints, installation system, color, and surface treatment. It can display rich roof performance effects and has excellent design freedom. It is a new type of material with convenient construction, ideal comprehensive performance, and remarkable thermal insulation effect. Its excellent performance has attracted people's attention.

The panel material used in the Aluminum Honeycomb Panel is better and has a high flatness. The back of the aluminum panel does not need reinforcing ribs, and its strength and rigidity can also meet the required requirements. Aluminum honeycomb panels are based on different buildings, regions, the height of the curtain wall, and the size of the wind pressure.

Carry out design calculations, and then select the thickness of the Acp Aluminium Panel and the thickness of the honeycomb according to the design requirements, and manufacture different types of large and small blocks according to the design requirements, and Sandwich Aluminum Panel can meet the following main indicators: wind pressure indicators, air tightness indicators, and water tightness Indicators, impact resistance performance indicators, plane deformation, heat preservation, sound insulation and other indicators. The surface of the Aluminium Honeycomb Panel For Home Decoration is generally sprayed with fluorocarbon or powder spray, and the thickness of the sprayed film is 40-60μ.

The location of the sealing hole is also very important for the aluminum honeycomb panel. Otherwise, if it is installed on the wall, rainwater will flow into the Aluminium Honeycomb Board core, which will damage the core and cause water leakage. Therefore, the outer curtain wall aluminum veneer of the aluminum honeycomb panel The thickness of the Harga Aluminum Composite Panel should be wider than the aluminum veneer of the inner curtain wall, and the sides should be bent inward at a 90-degree angle to fully cover the honeycomb glued or welded, and no water leakage is allowed.

We remind you that the lightning protection problem of Dibond 3mm Aluminium Composite Panel should also be paid attention to, and we should not be sloppy. We know that the structure of Extruded Aluminum Honeycomb panels is sandwiched between two aluminum plates with a thickness of 0.8mm~1.2mm and 1.2mm~l.8mm. It is made of a honeycomb-shaped middle core layer made of different Larson Aluminium Composite Panel materials.