Gluing And Jointing Of Aluminum-Plastic Honeycomb Decoration Panel
2021-06-30
When Wall Aluminum Cladding plastic panels are used to decorate the Dibond ACM Panels surface of a building, there are generally gaps of a certain width between the Acm Aluminum Composite panels. For aesthetics, it is generally necessary to fill the gap with black sealant. In order to save time when glueing, some Aluminum Honeycomb Panels construction workers do not use paper tape to ensure that the glue is neat and regular, but use the protective film on the surface of the aluminum-plastic board as a substitute. Implementation: Use sticky paper on both sides according to the ratio. Choose glass glue and structural glue to roughly fill Aluminum Plastic Panel in. Scrape it with a putty knife. After it dries, you can tear off the sticky paper. Since the protective film will be torn to different degrees when the aluminum-plastic panel is cut, Aluwell Composite Panel is impossible to clean up the glue seam when it is used as a substitute for the protective tape. The main problem with the uneven glue seam of the Aluminum Composite Panel is this, so we don`t have to worry about it when using Best Aluminium Acp Works. If you are not familiar with this kind of Dibond Composite Panel operation, don`t do it yourself. Generally, please reply when decorating. If people come to install it, they will be more familiar with it. If you have the aluminum-plastic panel brand of Composite Aluminum Panel System you need, you can contact the Acp Aluminium Panel manufacturer by phone. Welcome to contact us.
